| | |
 | 12V DC 200 mA Wall Power Supply
2.5mm Phone Plug
Model AD35-0900200DU
Output is clean and adequate for use with radios and other audio equipment as well as calculators, chargers, and an endless use of small devices. The six foot cord has a 2.5mm phone plug wired with positive on the tip.
- Input: 120V AC 60 Hz
- Output: 12V DC 200 mA
- Regulated: No
- Connector: 2.5mm Straight Phone Plug
- Polarity: Tip Positive
- Cable Length: 6 feet
- UL Rating: Yes
- Weight 5.4oz.
Price: $6.99
|
| |
|
12V DC 300 mA Wall Power Supply
3.5mm Phone Plug
Philmore Model MW1230
Output is clean and adequate for use with radios and other audio equipment as well as calculators, chargers, and an endless use of small devices. The six foot cord has a 3.5mm phone plug wired with positive on the tip.
- Input: 120V AC 60 Hz
- Output: 12V DC 300 mA
- Regulated: No
- Connector: 3.5mm Straight Phone Plug
- Polarity: Tip Positive
- Cable Length: 6 feet
- UL Rating: Yes
- Weight 11oz.
Price: $7.16
| |
| |
|
 | 12V DC 300 mA Regulated
Wall Power Supply
With Screw Terminals
Revere RTD12/3RT
The RTD12/3RT is a Class II UL 12VDC Regulated 300mA Power Supply with Red LED indicator for power supervision and built in cable strain relief. Its construction is a bright decorator white colored plastic. It comes with a mounting tab and mounting screw. Its compact design, as well as its decorator color, makes it perfectly suitable for office or residential decors. We recommend this tranformer for video cameras requiring 12 Volts because the voltage stays at 12 Volts (up to 300 mA) regardless of load or powerline fluctuations. See compatable cable part number RTD-ADP2.1 below.
- Input: 117V AC .60 Hz
- Output: 12VDC 300 mA Regulated
- Indicator: Red LED
- Connector: #6 -32 Screw Terminals (See Picture)
- Weight 8 oz.
- Size: 2" W x 1-5/8" D x 2 - 7/8" H
- Color: Bright Decorator White
Price: $16.04
|
| |
|
12V DC 400 mA
Wall Power Supply
2.5 x 5.5mm Plug
Model D12400-20IP
This plug-in wall type 12VDC Power Supply/Charger is ideal to power cellular telephones as a battery eliminator and plug-in saver/charger up to 400mA. The unit is UL listed and non regulated. Technical Specifications
- Input: 120V AC 60 Hz
- Output: 12V DC 500 mA
- Regulated: No
- Connector: 2.5 x 5.5 mm Plug
- Size: 2-3/4" L x 2" W x 1-5/8" D (69x49x43xmm)
- Polarity: Inside Positive
- Cable Length: 6 feet
- Approvals: UL/CSA
- Weight 9.6 oz.
Price: $6.95
|  |
| |
|
| | 12V DC 500 mA
Wall Power Supply
3.5mm Phone Plug
Philmore Model MW1250
Output is clean and adequate for use with radios and other audio equipment as well as calculators, chargers, and an endless use of small devices. The six foot cord has a 3.5mm phone plug wired with positive on the tip.
- Input: 120V AC 60 Hz
- Output: 12V DC 500 mA
- Regulated: No
- Connector: 3.5mm Straight Phone Plug
- Polarity: Tip Positive
- Cable Length: 6 feet
- UL Rating: Yes
- Weight 11oz.
Price: $8.32
|
| |
|
12V DC 500 mA Regulated
Wall Power Supply
2.1 x 5.5mm Plug
Verticle Blades
Model SA120A5V205IP
This is a compact 12VDC, 500mA regulated energy efficient/energy star CEC level V plug in wall type Power Supply/Charger with vertical blades. The vertical blade utilizes plug outlets and power strips more efficiently than ever with a sleek space-conscious, light-weight design, while delivering clean consistent power. Ideal to power cellular telephones as a battery eliminator and plug-in saver/charger up to 500mA. Technical Specifications
- Input: 120-220 VAC 50/60 Hz
- Output: 12.0 VDC 500 mA
- Regulated: Yes
- Connector: 2.1 x 5.5 mm Plug
- Connector Polarity: Inside Positive
- Size: 2-3/8" L x 1" W x 1-5/8" D (61.6x26x29mm)
- Cable Length: 6 feet
- Approvals: UL/CUL/FCC/LPS/PSE/WEEE/ROHS/IV
- Weight 2.5 oz.
Price: $9.96
|  |
| |
|
 | 12V DC 500 mA
Wall Power Supply
2.1 x 5.5mm Plug
Model D12500205IP
This plug-in wall type 12VDC Power Supply/Charger is ideal to power cellular telephones as a battery eliminator and plug-in saver/charger up to 500mA. The unit is UL listed and non regulated. Technical Specifications
- Input: 120V AC 60 Hz
- Output: 12V DC 500 mA
- Regulated: No
- Connector: 2.1 x 5.5 mm Plug
- Size: 2-5/8" L x 1-7/8" W x 1-5/8" D
- Polarity: Inside Positive
- Cable Length: 6 feet
- UL Rating: Yes
- Weight 11oz.
Price: $6.95
|
| |
|
12V DC 500 mA Regulated
Wall Power Supply
2.5 x 5.5mm Plug
Verticle Blades
Model SA120A5V206IP
This is a compact 12VDC, 500mA regulated energy efficient/energy star CEC level V plug in wall type Power Supply/Charger with vertical blades. The vertical blade utilizes plug outlets and power strips more efficiently than ever with a sleek space-conscious, light-weight design, while delivering clean consistent power. Ideal to power cellular telephones as a battery eliminator and plug-in saver/charger up to 500mA. Technical Specifications
- Input: 120-220 VAC 50/60 Hz
- Output: 12.0 VDC 500 mA
- Regulated: Yes
- Connector: 2.5 x 5.5 mm Plug
- Connector Polarity: Inside Positive
- Size: 2-3/8" L x 1" W x 1-5/8" D (61.6x26x29mm)
- Cable Length: 6 feet
- Approvals: UL/CUL/FCC/LPS/PSE/WEEE/ROHS/IV
- Weight 2.5 oz.
Price: $9.96
| |
| |
|
 | 12 VDC 500 mA Regulated
Wall Power Supply with Multiple Plugs
Philmore MW48-1250A
Select this tranformer if you know the voltage but you don't know the current being drawn by your electronics equipment or the connector type. This regulated transfomer with six types of connectors and the polarity can be easily reversed to match your devices. Using a regulated power supply is the best course of action to avoid damge to your valuable equipment.
- Input: 120 VAC
- Regulated: Yes
- Center Pin Polarity: Reversible
- Plug orientation: Right Angle
- Plug types: 2.5mm, 3.5mm, 2.1mm x 5.5mm, 2.5mm x 5.5mm,1.35mm x 3.5mm and 1.7mm x 4.0mm.
- Cable Length: Approximately 6 feet
- UL Rating: Yes
Click Here for Selection Guide
Price: $13.76
|
| |
|
12V DC 500 mA Regulated
Wall Power Supply
with Screw Terminals
Revere RTD12/5RT
The RTD12/5RT is a Class II UL 12VDC Regulated 500mA Power Supply with Red LED indicator for power supervision and built in cable strain relief. Its construction is a bright decorator white colored plastic. It comes with a mounting tab and mounting screw. Its compact design, as well as its decorator color, makes it perfectly suitable for office or residential decors. We recommend this tranformer for multiple video cameras requiring 12 Volts because the voltage stays at 12 Volts regardless of load (up to 500 mA) or powerline fluctuations. See compatable cable part number RTD-ADP2.1 below.
- Input: 117V AC .60 Hz
- Output: 12VDC 500 mA Regulated
- Indicator: Red LED
- Connector: #6 -32 Screw Terminals (See Picture)
- Weight 1 lb.
- Size: 2-1/4" W x 2 " D x 3-5/8" H
- Color: Bright Decorator White
Price: $17.37
| |
| |
|
| | 12V DC 800 mA Wall Power Supply
3.5mm Phone Plug
Philmore Model MW1280
Output is clean and adequate for use with radios and other audio equipment as well as calculators, chargers, and an endless use of small devices. The six foot cord has a 3.5mm phone plug wired with positive on the tip.
- Input: 120V AC 60 Hz
- Output: 12V DC 800 mA
- Regulated: No
- Connector: 3.5mm Straight Phone Plug
- Polarity: Tip Positive
- Cable Length: 6 feet
- UL Rating: Yes
- Weight 1 lb
Price: $11.14
|
| |
|
12V DC 1000 mA Regulated
Wall Power Supply
2.1 x 5.5mm Plug
Speco PSW5
This is a small and light weight 12 volt DC 1 Amp (1000mA) power supply. It is center positive and can be used with all color Pro-Video cameras. Transformer plugs in at right angle to the power socket so it doesn't block the second AC wall socket.
- Input 100VAC to 240VAC 50/60 Hz @0.5 Amp Max
- Output 12VDC 1000 mA (1A) Regulated. Can be used at any current up to 1000mA
- Connector: Coaxial, 2.1 x 5.5mm - Commonly used on video cameras.
- Polarity: Inside Positive
- Type: Switching
- Size: 3" L x 1" W x 2" D
- Weight: 0.23 lbs
Price: $12.10
|  |
| |
|
 | 12V DC 1000 mA Regulated Power Supply with Screw Terminals
Revere RTD12/10RT
The RTD12/10RT is a Class II UL 12VDC Regulated 1000 mA Power Supply with Red LED indicator for power supervision and built in cable strain relief. Its construction is a bright decorator white colored plastic. It comes with a mounting tab and mounting screw. Its compact design, as well as its decorator color, makes it perfectly suitable for office or residential decors. We recommend this tranformer for multiple video cameras requiring 12 Volts because the voltage stays at 12 Volts regardless of load (up to 1000 mA) or powerline fluctuations. See compatable cable part number RTD-ADP2.1 below.
- Input: 117V AC 60 Hz
- Output: 12VDC 1000 mA Regulated
- Indicator: Red LED
- Connector: #6 -32 Screw Terminals (See Picture)
- Weight 1.5 lb.
- Size: 3" W x 2-1/2" D x 4 - 1/8" H
- Color: Bright Decorator White
Price: $23.09
|
| |
|
Cable with 2.1 x 5.5 mm Plug
With Spade Lugs & 9ft Cord
Revere RTD-ADP2.1
This is a 9 foot white 20 AWG zip cord cable with a 2.1 x 5.5 mm plug on one end, and two 6-32 spade lugs on the other end. Polarity of connector is identified by a red strip on one of the wires, which indicates the inside center of the plug. Although designed for use with models RTD12/3RT, RTD12/5RT, RTD12/10RT and Video Cameras, it can also be used for other applications.
Price: $3.96
|  |
| |
|
 | 12V DC 4.1A Regulated Desk Top
Power Supply with Lighter Socket
Philmore Model 48-130
This is a lightweight and compact regulated 12VDC, 4.1 Amp desk top power supply for operating automotive equipment in the home or office. Use your house AC power to operate items such as spotlights, CB and Ham Radio, Thermoelectric Coolers, Video Equipment and More .. The unit plugs into an AC outlet and has a cigarette lighter power socket. Use the TC6106 or TC6115 to adapt to different dc plugs.
- Input 100V - 140V AC 60 Hz
- Output 12VDC 4.1 Amps, 5 Amp Surge
- Fully Regulated Low Ripple Switching Power Supply
- Connector: Cigarette Power Socket
- Power Indicator Light
- Short Circuit Protection
- Automatic Overload and Thermal Cut-Off
- UL and cUL Listed
- Size: 2-1/2" W x 5- 1/4"L x 1-3/4"H
- Weight 1.1 lbs
Price: $33.95
|
| |
