| | |
 | Cap Cover Chassis
5" L x 7" W x 2" H
LMB Heeger 572C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $18.11
|
| |
|
Cap Cover Chassis
7" L x 7" W x 2" H
LMB Heeger 772C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $19.32
| |
| |
|
| | Cap Cover Chassis
8" L x 4" W x 2" H
LMB Heeger 842C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $16.34
|
| |
|
Cap Cover Chassis
5" L x 10" W x 3" H
LMB Heeger 5103C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $23.21
| |
| |
|
| | Cap Cover Chassis
5" L x 9.5" W x 2" H
LMB Heeger 5952C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $18.53
|
| |
|
Cap Cover Chassis
8" L x 10" W x 3" H
LMB Heeger 8103C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $29.12
| |
| |
|
| | Cap Cover Chassis
8" L x 12" W x 3" H
LMB Heeger 8123C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $32.29
|
| |
|
Cap Cover Chassis
10" L x 10" W x 3" H
LMB Heeger 10103C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $31.83
| |
| |
|
| | Cap Cover Chassis
10" L x 12" W x 3" H
LMB Heeger 10123C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $33.10
|
| |
|
Cap Cover Chassis
11" L x 17" W x 3" H
LMB Heeger 11173C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $62.48
| |
| |
|
| | Cap Cover Chassis
13" L x 17" W x 3" H
LMB Heeger 13173C
The cap cover construction enables the builder to use either the top or bottom of the chassis for construction. The chassis can also be mounted on its side, and construction can be on both top and bottom at the same time.
- Sturdily built from Aircraft quality aluminum, Type 3000 H-14 .040 to .060.
- Special technique in welding the corners makes for a stronger chassis than the orthodox type.
- Maximum panel area exposed for component mounting.
- Cap construction allows use of all the space inside the chassis without being hindered by the mounting flange, which takes from 10% to 20% of the mounting space out of the average chassis.
- Can be ordered with perforations - contact sales for price.
- Available in plain aluminum.
Price: $69.70
|
| |
