Unique Products and Components$20 Minimum Merchandise OrderThank You
DATAKOAT is a clear protective brush-on coating for local application to dry transfers that leaves a shiny coating.
All dry transfers have limited resistance to abrasion and handling; they should be given a protective coating. A great deal of development has gone into creating Datak's protective coatings, which we believe to be the best that you can use on any brand of transfers.
Protects dry transfers with a tough, clear, weatherproof shield. Waterclear and will not yellow with age. For use on hard surfaces as enamels, plastics, metal, etc. ...
RESISTANCE: unaffected by methanol, ethanol, isopropanol, hexane, naptha and minerals spirits. Unaffected by most lubricating oils and hydraulic fluids. But soluble in; Freon, methylene chloride, butanol, higher alcohols, acetone, ketones, toluene, xylene and glycol ethers.
HARDKOAT clear sprays protect dry transfers on absorbent surfaces such as paper. Abrasion resistance is superior to DATAKOAT, but resistance to weathering and UV is not as good. Also works on metal, plastic and painted surfaces.
One coat over paper will completely protect a dry transfer from scuffing and abrasion. Matte coats give a pleasing frosted effect. Heavy multiple spray coats may have a perceptible yellowish tint, so use DATAKOAT where an absolutely water-clear coat is essential. HARDKOAT films dry tack-free within a few minutes, but require several days to fully harden.
When coating a large area, the gloss spray can produce a pleasing, somewhat shiny appearance. If using on local area, the matte finish tends to be less visible.
Note: This chemical product can ship only by UPS ground.
Recommneded for Datak dry transfer characters and lines from .080" to 1/4"
This quality stylus burnisher will give you a better, easier job with dry transfers than using a ball point pen. The polished metal tip provides even transfer, even if you use too much pressure. Opposite end has a 3/8" flexible burnisher.
When tackling serious layouts, we strongly recommend this tool.
Recommneded for Datak dry transfer characters and lines from 1/4" and larger.
Use PrePen for any spot sanding & cleaning. It goes where other tools or sand paper can't reach! The powerful glass fibers get in to throughly clean every corner, crevice and pocket. Any rust, wax, and dirt is removed. It's like a pencil point sand blaster.
The 20,000 glass fibers in this PrepPen cartridge are finer than a human hair yet stronger than steel when it comes to cleaning power.
The glass fiber cartridge can be extended out by turning the handle as needed, and also can be retracted when not in use.
Will not scratch glass or stainless steel.Try it on a penny to see how remarkable this tool is!
Two long-lasting glass fiber cartridges come with every PrepPen You'll probably find so many uses for the PrepPen that you eventually wear these cartriges out. We stock the refill 2 pack item 12-440 (see below). Price: $8.49
Refill pack of 2 for PrepPen model 12-437 above. Price: $5.29
This kit is a must for the hobbyist or anyone working with P.C. artwork. Very handy for many uses in the lab as well.
Packaged in attractive four color box.