| | |
 | Wall Plate Bracket
Philmore # 72-4100B
This bracket is designed for all Low Voltage Applications. It fits into EXISTING CONSTRUCTION. Just cut a hole in the wall and bend the tabs back and behind the wall to secure the bracket to the wall. Next mount standard wall plates or any of our Home Theater Wall Plates to this bracket.Works with P/N's 75-1000, 75-2000, 75-3000 or any of the Home Theater Wall Plates.
Price: $1.19
|
| |
|
Egg Insulator - White Glazed
Philmore J852
This white glazed egg insulator is ideal for wire antenna applications. This high strength insulator is made from the best quality steatite ceramic. It is designed with fully curved surfaces to prevent cutting and chaffing of wires. Sold individually.
Price: $2.65
|  |
| |
|
 | Insulator
Philmore 2130CP
These insulators are weather proof, lightweight durable, molded tenite plastic. dielectric strenght is comparable to its ceramic predecessor without susceptibility to cracking or breakage under impact or severe temperature change Ideal for shortwave and ham antennas. The diameter is 1" and the length is 2-1/2". The mounting holes are 1/4" in diameter.
Price: $1.85
|
| |
|
Xenon Flash Tube
Philmore 485
- U -Shaped for high flash per second timing and signal light
- Ideal for strobe light, photoflash, etc.
- Minimum anode voltage - 200 V
- Maximium anode voltage - 400 V
- Use with No. 486 Trigger Coil (See below)
Price: $8.15
|  |
| |
|
 | Trigger Coil for above #485 Flash Tube
Philmore 486
- 4 KV
- Use with Philmore 485 Xenon Flash Tube
Price: $4.94
|
| |
|
Cadmium Sulphide Photo Cell - 5mm
Pack of 3 - Philmore # 10805
The cadmium sulfide photo cell has a high resistance in darkness but resistance is quite low when in light of 100 foot-candles or more. A typical use is for switching on lighting after dark. These are also used in alarm systems, exposure meters, flame detectors, opto-couplers etc. This cell has a dark resistance of 5,000 ohms and 300 ohms in bright light (100 cds. or more). Features:
- Epoxy- Coated Low Profile Cell
- High reliable power dissipation
- Compact dimensions
Specifications:
- OD: 5mm
- Maximum Power Dissipation: 90 Watts
Click Here For Applications
Price: $2.89
|  |
| |
|
| | Cadmium Sulphide Photo Cell - 7mm
Pack of 3 - Philmore # 10807
The cadmium sulfide photo cell has a high resistance in darkness but resistance is quite low when in light of 100 foot-candles or more. A typical use is for switching on lighting after dark. These are alos used in alarm systems, exposure meters, flame detectors, opto-couplers etc. All cells have a dark resistance of 5,000 ohms and 3000 in bright light. Features:
- Epoxy- Coated Low Profile Cell
- High reliable power dissipation
- Compact dimensions
Specifications:
- OD: 7mm
- Maximum Power Dissipation: 150 Watts
Click Here For Applications
Price: $3.35
|
| |
|
Cadmium Sulphide Photo Cell - 10mm
Pack of 3 - Philmore # 10810
The cadmium sulfide photo cell has a high resistance in darkness but resistance is quite low when in light of 100 foot-candles or more. A typical use is for switching on lighting after dark. These are alos used in alarm systems, exposure meters, flame detectors, opto-couplers etc. All cells have a dark resistance of 5,000 ohms and 3000 in bright light. Features:
- Epoxy- Coated Low Profile Cell
- High reliable power dissipation
- Compact dimensions
Specifications:
- OD: 10mm
- Maximum Power Dissipation: 400 Watts
Click Here For Applications
Price: $3.95
| |
| |
