| | |
 | Small I.C. Layout
Phenoloic Protoboard
Philmore Datak 12-607
This is a Philmore Datak protoboard. You get two phenolic break away boards for this price. Designed to hold any combination of 2, 8pin dip, or 1, 14 and 1 6 pin dip or 1, 20 pin dip chip plus some associated components. -
Size: 1.8" Wide by 3.6" Long or 2 boards @ 1.8" x 1.8"
- Material: Phenolic
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $1.89
|
| |
|
Small I.C. Layout
Fiberglass Protoboard
Philmore Datak 12-608
This is a Philmore Datak protoboard. You get two break away fiberglass boards for this price. Designed to hold any combination of 2, 8pin dip, or 1, 14 and 1 6 pin dip or 1, 20 pin dip chip plus some associated components. -
Size: 1.8" Wide by 3.6" Long or 2 boards @ 1.8" x 1.8"
- Material: 1/16" FR-4 Fiberglass
- Dielectric Constant: 4.7 MHz and 4.25 at 1 GHz
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $3.14
| |
| |
|
 | Small Phenolic Protoboard
With Center Buses
Philmore Datak 12-611
Features drilled copper pads connected via traces in groups of two and three. A general purpose small board that can accomocate transistors, IC's and common passive components. -
Size: 1.69" Wide by 2.87" Long
- Material: Phenolic
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $1.55
|
| |
|
Small Fiberglass Protoboard
With Center Buses
Philmore Datak 12-612
Features drilled copper pads connected via traces in groups of two and three. A general purpose small board that can accomocate transistors, IC's and common passive components. -
Size: 1.69" Wide by 2.87" Long
- Material: 1/16" FR-4 Fiberglass
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $3.47
| |
| |
|
 | Medium Size Phenolic Protoboard
5 Holes Per Pad and 2 Buses
Philmore Datak 12-617
This protoboard is large enough to accomdate circuits containing serveral IC's with fourty-five rows of holes that are set up so that IC's can straddle the center of the board and each IC has five pads for the connection fo the IC pins to other components. The component side pad tracks are imprinted with white ink so the user will know where the copper is on the solder side. That means you don't have to waist time flipping the board over to see the connection tracks. -
Size: 1.90" x 5.16"
- Material: Phenolic
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $2.85
|
| |
|
Medium Size Fiberglass Protoboard
5 Holes Per Pad and 2 Buses
Philmore Datak 12-622
This protoboard is large enough to accomdate circuits containing serveral IC's with fourty-five rows of holes that are set up so that IC's can straddle the center of the board and each IC has five pads for the connection fo the IC pins to other components. The component side pad tracks are imprinted with white ink so the user will know where the copper is on the solder side. That means you don't have to waist time flipping the board over to see the connection tracks. -
Size: 1.90" x 5.16"
- Material: 1/16" FR-4 Fiberglass
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $4.32
| |
| |
|
 | Large Size Phenolic Protoboard
4, 2 and 1 Holes Per Pad
Philmore Datak # 12-600
This phenolic protoboard has over 1900 pad holes and is large enough to accomodate some large circuits. The component side pads are imprinted with white ink showing the pad tracks so the user will know where the copper is on the solder side. That means you don't have to waist time flipping the board over to see the connection tracks. Most of the board has rows of alternating 4 holes per pad and then 2 holes per pad. There is also a section of the board with 1 pad-per hole. -
Size: 4.3" x 5.5"
- Material: Phenolic
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $4.99
|
| |
|
Large Size Fiberglass Protoboard
4, 2 and 1 Holes Per Pad
Philmore Datak # 12-601
Picture shows Phenolic but is FiberglassThis phenolic protoboard has over 1900 pad holes and is large enough to accomodate some large circuits. The component side pads are imprinted with white ink showing the pad tracks so the user will know where the copper is on the solder side. That means you don't have to waist time flipping the board over to see the connection tracks. Most of the board has rows of alternating 4 holes per pad and then 2 holes per pad. There is also a section of the board with 1 pad-per hole. -
Size: 4.3" x 5.5"
- Material: 1/16" FR-4 Fiberglass
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $8.32
| |
| |
|
 | Versa Strip Phenolic Prototype Board
Waldom / GC 22-502
Alpha Numeric Indexing Silver Plated Land Patterns Predetermined Short Tracks for Multi-IC Work 0.1" Centers x 3-102"W x 6"L x 1/16" Thick
Price: $7.28
|
| |
|
Versa Strip Phenolic Prototype Board
Waldom / GC 22-506
Alpha Numeric Indexing Silver Plated Continuois Strip Land Patterns Predetermined Short Tracks for Multi-IC Work 0.1" Centers x 3-1/2"W x 6"L x 1/16" Thick
Price: $7.28
|  |
| |
|
 | Versa Strip Phenolic Prototype Board
Waldom / GC 22-510
Save time and money with ready-to-use printed circuit boards. Excellent for use in prototype building, experimenting, hobby or science projects and kit building. Made of tough phenolic with .03" punched holes on 0.150" centers. Quad land pattern. 3-3/8" wide x 6-3/4" long x 1/16" thick.
Price: $4.95
|
| |
