$20.00 Minimum Merchandise Order - Thank You!

Online Catalog:Philmore and Calrad Electronics :Panel Lamps & LED's:Panel Lamps & Holders:Neon 120V Panel Lamps

	Rectangular Red Neon Snap-In Indicator - Philmore 11-162 This panel lamps has a built-in resistors and are designed to operate on 120V AC and have quick connect leads. The mounting hole is 11.2 mm X 25.7 mm Operating Voltage: 120V Mounting Hole: 27mm x11.5mm Size: 11.2mm (W) x 26mm (L) x 15.5mm (D) LI>Terminals: .250 Quick Connect Lamp: Neon   Price:  $2.09
Rectangular Orange Neon Snap-In Indicator - Philmore 11-163 This panel lamps has a built-in resistors and are designed to operate on 120V AC and have quick connect leads. The mounting hole is 11.2 mm X 25.7 mm Operating Voltage: 120V Mounting Hole: 27mm x11.5mm Size: 11.2mm (W) x 26mm (L) x 15.5mm (D) Terminals: .250 Quick Connect Lamp: Neon   Price:  $2.09
	Square Orange Neon Indicator With Snap-In Metal Bezel Philmore 11-143 This panel lamps has a 16.3 mm square lens and mount into a 14 mm round hole. These have a built-in resistor and operate at 120VAC with wire leads. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 12.7mm (Diameter) x 20.5mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
Square Green Neon Indicator With Snap-In Metal Bezel Philmore 11-146 This panel lamps has a 16.3 mm square lens and mount into a 14 mm round hole. These have a built-in resistor and operate at 120VAC with wire leads. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 12.7mm (Diameter) x 20.5mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
	Large Rectangular Red Neon Snap-In Indicator - Philmore 11-142 This panel lamps has a large rectangular 15.5 mm X 19.5 mm lens, a 120V AC Neon lamp (with resistor) and solder terminals. Mounts into a 15.8mm (5/8") round hole with supplied mounting nut and washer. Operating Voltage: 120V Mounting Hole: 15.8mm (5/8") Size: 16mm (Diameter) x 31.8mm (Length) Terminals: Solder Lamp: Neon   Price:  $2.79
Large Rectangular Amber Neon Snap-In Indicator - Philmore 11-144 This panel lamps has a large rectangular 15.5 mm X 19.5 mm lens, a 120V AC Neon lamp (with resistor) and solder terminals. Mounts into a 15.8mm (5/8") round hole with supplied mounting nut and washer. Operating Voltage: 120V Mounting Hole: 15.8mm (5/8") Size: 16mm (Diameter) x 31.8mm (Length) Terminals: Solder Lamp: Neon   Price:  $2.79
	Large Rectangular Green Neon Snap-In Indicator - Philmore 11-145 This panel lamps has a large rectangular 15.5 mm X 19.5 mm lens, a 120V AC Neon lamp (with resistor) and solder terminals. Mounts into a 15.8mm (5/8") round hole with supplied mounting nut and washer. Operating Voltage: 120V Mounting Hole: 15.8mm (5/8") Size: 16mm (Diameter) x 31.8mm (Length) Terminals: Solder Lamp: Neon   Price:  $2.79
Flat-Top Red Neon Snap-In Indicator - Philmore 11-102 This panel lamps has a built-in resistor and are made to operate on 120V AC. The lens is 12.5 mm in diameter with a chrome bezel. The mounting hole is 13.5 mm and they have wire leads. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 32mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
	Flat-Top Orange Neon Snap-In Indicator - Philmore 11-103 This panel lamps has a built-in resistor and are made to operate on 120V AC. The lens is 12.5 mm in diameter with a chrome bezel. The mounting hole is 13.5 mm and they have wire leads. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 32mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
Flat-Top Green Neon Snap-In Indicator - Philmore 11-105 This panel lamps has a built-in resistor and are made to operate on 120V AC. The lens is 12.5 mm in diameter with a chrome bezel. The mounting hole is 13.5 mm and they have wire leads. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 32mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
	Flush Lens Red Neon Snap-In Indicator - Philmore 11-112 This is a snap-in panel lamps with a built-in resistor and constructed to operate at 120V AC with wire leads. The lens is flush with the chrome bezel. The mounting hole is 14 mm. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 27.3mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
Flush Lens Orange Neon Snap-In Indicator - Philmore 11-113 This is a snap-in panel lamps with a built-in resistor and constructed to operate at 120V AC with wire leads. The lens is flush with the chrome bezel. The mounting hole is 14 mm. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 27.3mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
	Flush Lens Green Neon Snap-In Indicator - Philmore 11-115 This is a snap-in panel lamps with a built-in resistor and constructed to operate at 120V AC with wire leads. The lens is flush with the chrome bezel. The mounting hole is 14 mm. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 27.3mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
High Dome Red Neon Snap-In Indicator - Philmore 11-122 This panel lamp has a 13 mm high dome shaped lens, wire leads, and a built-in resistor for operation at 120V AC. The mounting hole is 13.5 mm in diameter. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 20.5mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
	High Dome Orange Neon Snap-In Indicator - Philmore 11-123 This panel lamp has a 13 mm high dome shaped lens, wire leads, and a built-in resistor for operation at 120V AC. The mounting hole is 13.5 mm in diameter. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 20.5mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
High Dome Green Neon Snap-In Indicator - Philmore 11-125 This panel lamp has a 13 mm high dome shaped lens, wire leads, and a built-in resistor for operation at 120V AC. The mounting hole is 13.5 mm in diameter. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 13mm (Diameter) x 20.5mm (Length) Terminals: 12 cm Wire Leads Lamp: Neon   Price:  $1.65
	High Dome Red Neon Snap-In Indicator - Philmore 11-132 Panel Lamp with a 13 mm high dome shaped lens, .187" Quick Connect Tabs, and a built-in resistor for operation at 120V AC. The mounting hole is 13.5 mm diameter. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 12.7mm (Diameter) x 26mm (Length) Terminals: .187 Quick Connect Lamp: Neon   Price:  $2.04
High Dome Orange Neon Snap-In Indicator - Philmore 11-133 Panel Lamp with a 13 mm high dome shaped lens, .187" Quick Connect Tabs, and a built-in resistor for operation at 120V AC. The mounting hole is 13.5 mm diameter. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 12.7mm (Diameter) x 26mm (Length) Terminals: .187 Quick Connect Lamp: Neon   Price:  $2.04
	High Dome Green Neon Snap-In Indicator - Philmore 11-135 Panel Lamp with a 13 mm high dome shaped lens, .187" Quick Connect Tabs, and a built-in resistor for operation at 120V AC. The mounting hole is 13.5 mm diameter. Operating Voltage: 120V Mounting Hole: 13.5mm Size: 12.7mm (Diameter) x 26mm (Length) Terminals: .187 Quick Connect Lamp: Neon   Price:  $2.04
0.20" Flat Top Lens Red Neon Snap-In Indicator - Philmore 11-2200 Picture shows Green but lens is red. This is RED neon snap-in panel lamp for 120VAC operation. It has .187 quick connect terminal. The flat lens is raised.20" above the the chrome bezel. The mounting hole is size is .50" Operating Voltage: 120V Mounting Hole: .50" Panel Thickness: .030 to .093" Length behind panel: 1.09" Terminals: 0.187 Quick Connect Lamp: Neon   Price:  $3.47
	0.20" Flat Top Lens Amber Neon Snap-In Indicator - Philmore 11-2202 Picture shows Green but lens is amber This is AMBER neon snap-in panel lamp for 120VAC operation. It has .187 quick connect terminal. The flat lens is raised.20" above the the chrome bezel. The mounting hole is size is .50" Operating Voltage: 120V Mounting Hole: .50" Panel Thickness: .030 to .093" Length behind panel: 1.09" Terminals: 0.187 Quick Connect Lamp: Neon   Price:  $3.47
Dome Red Neon Splash Proof NEMA 3R Indoor/ Outdoor Harsh Environment Philmore 11-2840 This new NEMA 3R "M" series splash proof dome indicator light mounts securely in a 3/8" mounting hole with included O-Ring, lock washer and hex nut to provide a weather proof seal. This rugged splash proof indicator is ideal for harsh environments and is sutiable for indoor or outdoor use. The typical applications include: Transportation Industrial Machinery Emergency Vehicles Food Equipment RV's Technical Data: Rating: NEMA 3R Panel Hole: 0.375" Typical -customer responsible for determing final size based on panel material and thickness Body Material: Nylon Lens Diameter: 0.36" Lens Height: 0.26" Lens Material: Polycarbonate Bezel Material: Stainless Steel Wire Gauge: 20 Ga Wire Strip 1/2" Operating Voltage: 120V Body Size: 3/8" Dia x 1.5" Length Terminals: 6" Wire Leads Lamp: Neon Panel Thickness Range: .03" - 25"   Price:  $4.46
	Dome Amber Neon Splash Proof NEMA 3R Indoor/ Outdoor Harsh Environment Philmore 11-2842 This new NEMA 3R "M" series splash proof dome indicator light mounts securely in a 3/8" mounting hole with included O-Ring, lock washer and hex nut to provide a weather proof seal. This rugged splash proof indicator is ideal for harsh environments and is sutiable for indoor or outdoor use. The typical applications include: Transportation Industrial Machinery Emergency Vehicles Food Equipment RV's Technical Data: Rating: NEMA 3R Panel Hole: 0.375" Typical -customer responsible for determing final size based on panel material and thickness Body Material: Nylon Lens Diameter: 0.36" Lens Height: 0.26" Lens Material: Polycarbonate Bezel Material: Stainless Steel Wire Gauge: 20 Ga Wire Strip 1/2" Operating Voltage: 120V Body Size: 3/8" Dia x 1.5" Length Terminals: 6" Wire Leads Lamp: Neon Panel Thickness Range: .03" - 25"   Price:  $4.46
Dome White Neon Splash Proof NEMA 3R Indoor/ Outdoor Harsh Environment Philmore 11-2844 This new NEMA 3R "M" series splash proof dome indicator light mounts securely in a 3/8" mounting hole with included O-Ring, lock washer and hex nut to provide a weather proof seal. This rugged splash proof indicator is ideal for harsh environments and is sutiable for indoor or outdoor use. The typical applications include: Transportation Industrial Machinery Emergency Vehicles Food Equipment RV's Technical Data: Rating: NEMA 3R Panel Hole: 0.375" Typical -customer responsible for determing final size based on panel material and thickness Body Material: Nylon Lens Diameter: 0.36" Lens Height: 0.26" Lens Material: Polycarbonate Bezel Material: Stainless Steel Wire Gauge: 20 Ga Wire Strip 1/2" Operating Voltage: 120V Body Size: 3/8" Dia x 1.5" Length Terminals: 6" Wire Leads Lamp: Neon Panel Thickness Range: .03" - 25"   Price:  $4.46
	Dome Green Neon Splash Proof NEMA 3R Indoor/ Outdoor Harsh Environment Philmore 11-2848 This new NEMA 3R "M" series splash proof dome indicator light mounts securely in a 3/8" mounting hole with included O-Ring, lock washer and hex nut to provide a weather proof seal. This rugged splash proof indicator is ideal for harsh environments and is sutiable for indoor or outdoor use. The typical applications include: Transportation Industrial Machinery Emergency Vehicles Food Equipment RV's Technical Data: Rating: NEMA 3R Panel Hole: 0.375" Typical -customer responsible for determing final size based on panel material and thickness Body Material: Nylon Lens Diameter: 0.36" Lens Height: 0.26" Lens Material: Polycarbonate Bezel Material: Stainless Steel Wire Gauge: 20 Ga Wire Strip 1/2" Operating Voltage: 120V Body Size: 3/8" Dia x 1.5" Length Terminals: 6" Wire Leads Lamp: Neon Panel Thickness Range: .03" - 25"   Price:  $4.46
Dome Blue Neon Splash Proof NEMA 3R Indoor/ Outdoor Harsh Environment Philmore 11-2849 This new NEMA 3R "M" series splash proof dome indicator light mounts securely in a 3/8" mounting hole with included O-Ring, lock washer and hex nut to provide a weather proof seal. This rugged splash proof indicator is ideal for harsh environments and is sutiable for indoor or outdoor use. The typical applications include: Transportation Industrial Machinery Emergency Vehicles Food Equipment RV's Technical Data: Rating: NEMA 3R Panel Hole: 0.375" Typical -customer responsible for determing final size based on panel material and thickness Body Material: Nylon Lens Diameter: 0.36" Lens Height: 0.26" Lens Material: Polycarbonate Bezel Material: Stainless Steel Wire Gauge: 20 Ga Wire Strip 1/2" Operating Voltage: 120V Body Size: 3/8" Dia x 1.5" Length Terminals: 6" Wire Leads Lamp: Neon Panel Thickness Range: .03" - 25"   Price:  $5.25

Online Catalog:Philmore and Calrad Electronics :Panel Lamps & LED's:Panel Lamps & Holders:Neon 120V Panel Lamps

Minute Man Electronics

$20.00 Minimum Merchandise Order - Thank You!