| | |
 | K40 CB Antenna Black
Made in U.S.A. - Model K-40
Picture show with optional Magnamount#1 Selling Baseload CB Antenna Other CB antennas are hand made. That means they're hand wound. Hand soldered. And hand glued. With so much variation, no two can ever be exactly alike. But every K40 is exactly the same. Unvarying. Totally consistent. In materials, construction, and most importantly - in performance. That's because we computer design each and every component. And then match and assemble them on a fully automated production line. With tolerances that you just can't get with old-fashioned hand assembly. The result: Antenna performance that's far and away the best you can buy. At any price. And that means whatever road you travel, you can use your K40 with that wonderful feeling of supreme confidence. Guaranteed!
- Unvarying construction.
- Exclusive METLPLAS process molds metal and thermoplastic into a single part with extremely tight tolerances.
- Easy removal of coil and whip.
Quarter-turn quick release makes for simple storage in trunk to prevent theft or vandalism.
- Consistent SWR across all 40 channels.
Because our design features a capacitor unique to K40 technology.
- No static ball to get knocked off.
Instead 180 degree radiused tip dissipates static.
- Super easy tuning. No need to cut whip to set SWR because whip retracts into coil a full two inches.
- Highly efficient static damping from computer-designed isolation chamber.
- Universal mounting application.
Antenna can be mounted through the roof of the vehicle or on the trunk lip, or with the optional Magnamount bracket, on any metal or vinyl covered surface.
- Simple perpendicular adjustment.
Base rotates 30 degrees for proper vertical polarization.
Click Here for Cut-Away Drawing
Price: $59.95
|
| |
|
K40 CB Antenna - White / Gold
Made in U.S.A - Model K-40G
Same is a white version of the K40 with gold K40 Logo, white coax cable and gold plated stainless steel whip. See K40 above for features.
Price: $59.95
|  |
| |
|
| | Magnamount - Black
For K40 - Made in U.S.A.
Model M40
Affixes the K40 CB antenna to a metal surface on virtually any vehicle. Includes 120-pound pull, eight-pole magnet and all necessary hardware. Picture shown with K40 antenna, but does not include K40 antenna. Order separately.
Price: $25.49
|
| |
|
Magnamount - White
For K40 - Made in U.S.A.
Model M40W
Affixes the K40 CB Antenna to a metal surface on virtually any vehicle. Includes 120-pound pull, eight-pole magnet and all necessary hardware.
Price: $25.49
|  |
| |
|
 | Magnet Mount for Fiberglass or Whip Antennas
K40 T850
Affixes the fiberglass whips that have the standard 3/8" x 24 thread to a metal surface on virtually any vehicle. Includes 100-pound pull, eight-pole magnet, 18-feet of RG 58A/U coax cable and all necessary hardware. Recommended for use with standard fiberglass whip antennas of up to 3-1/2' or thin antennas up to 4-1/2'.
Price: $34.95
|
| |
|
K40 Weather Cap - White
K40 # W-40W
White weather cap. Protects K40 base assembly when coil is removed.
Price: $3.75
|  |
| |
|
| | K40 Weather Cap - Black
K40 # W-40
White weather cap. Protects K40 base assembly when coil is removed.
Price: $3.75
|
| |
|
K40 Trucker CB Antenna - Black - Made in U.S.A.
Model TR40
Government testing proves it!
K40 TRUCKER HAS MORE GAIN ON EVERY CHANNEL!
In recent testing by the U.S. Dept of Commerce, the K40 Trucker outperformed the Wilson 2000 in gain, VSWR and bandwidth on all 40 channels. Testing was performed by the National Institute of Standards and Technology - the same agency whose U.S. Atomic Clock is the world standard for all computer clocks and the Global Positioning System.
- 7000 Watts AM power handling capability
- Frequency range 26-30 MHz
- 1.6 MHz bandwith
- 1/4 wave length design
- Tunable design
- Designed for CB and 10 meter radios
- Special designs for weather band reception
- Can be used as a single antenna or co-phased for dual antennas
- 10" shaft length with 3/8" x 24 threads
- Solid 8 gauge 100% silver plated wire for maximum efficiency
- 49" stainless 17-7 ph tapered whip
- Special radiused tip to dissipate static - no static ball to get knocked off.
- Chrome plated whip adapter
- Ultrasonically sealed housing eliminates corrosion caused by water
- Exclusive computer aided MetlPlas process molds metal and thermoplastic into a single part for maximum reliability.
- Full 5-year Warranty
Compare K40 (Left) with Competition
Price: $59.95
|  |
| |
|
 | Magnetic Mount for Whip Antenna
K40 T850
Mount the K40 Whip antenna or any whip antenna that uses the standard thread mounting (3/8 in x 24) to a metal surface on virtually any vehicle!Recommended for use with fiberglass whip antennas up to 4 1/2 high x 3/8" thick. Includes:
- Includes 100-pound pull, eight-pole magnet
- 18-feet of RG 58A/U coax cable
- Pl259 attached to the coax cable
- Base Size: 5" Diamter x 1½" High
-
- 1 Year Quality Guarantee
Recommended use up to 3.5' standard antenna or up to 4.5' thin flexable antenna
Price: $37.49
|
| |
|
3' UHF Male to Male
On 50 Ohm RG58/U Coax Cable
Philmore # CA890
Designed for Amateur "Ham" Radio, CB and Communication equipment.
Price: $5.49
|  |
| |
|
| | 6' UHF Male to Male
On 50 Ohm RG58/U Coax Cable
Philmore # CA892
Designed for Amateur "Ham" Radio, CB and Communication equipment.
Price: $5.99
|
| |
|
1.5' UHF Male to Male
On 50 Ohm RG8-X Coax Cable
Philmore # CA702
UHF Male to Male cables for connecting R.F. equipment using low-loss RG8-X coaxial cable that will handle more power and more efficiently than most coaxial cables but without the bulky, hard to bend and heavy RG-8 etc. The UHF male connectors are molded for a strong and long life connection. Good for:
- Amateur Radio Antennas
- CB Radio Antennas
- R.F. Equipment
- Linear Amplifiers
- SWR Meters
- Power Meters
- Computers using 50 Ohm Cables with UHF Connectors
Price: $5.95
|  |
| |
|
| | 3' UHF Male to Male
On 50 Ohm RG8-X Coax Cable
Philmore # CA706
UHF Male to Male cables for connecting R.F. equipment using low-loss RG8-X coaxial cable that will handle more power and more efficiently than most coaxial cables but without the bulky, hard to bend and heavy RG-8 etc. The UHF male connectors are molded for a strong and long life connection. Good for:
- Amateur Radio Antennas
- CB Radio Antennas
- R.F. Equipment
- Linear Amplifiers
- SWR Meters
- Power Meters
- Computers using 50 Ohm Cables with UHF Connectors
Price: $6.89
|
| |
|
6' UHF Male to Male
On 50 Ohm RG8-X Coax Cable
Philmore # CA712
UHF Male to Male cables for connecting R.F. equipment using low-loss RG8-X coaxial cable that will handle more power and more efficiently than most coaxial cables but without the bulky, hard to bend and heavy RG-8 etc. The UHF male connectors are molded for a strong and long life connection. Good for:
- Amateur Radio Antennas
- CB Radio Antennas
- R.F. Equipment
- Linear Amplifiers
- SWR Meters
- Power Meters
- Computers using 50 Ohm Cables with UHF Connectors
Price: $7.99
| |
| |
|
| | 12' UHF Male to Male
On 50 Ohm RG8-X Coax Cable
Philmore # CA716
UHF Male to Male cables for connecting R.F. equipment using low-loss RG8-X coaxial cable that will handle more power and more efficiently than most coaxial cables but without the bulky, hard to bend and heavy RG-8 etc. The UHF male connectors are molded for a strong and long life connection. Good for:
- Amateur Radio Antennas
- CB Radio Antennas
- R.F. Equipment
- Linear Amplifiers
- SWR Meters
- Power Meters
- Computers using 50 Ohm Cables with UHF Connectors
Price: $7.99
|
| |
|
18' UHF Male to Male
On 50 Ohm RG8-X Coax Cable
Philmore # CA720
UHF Male to Male cables for connecting R.F. equipment using low-loss RG8-X coaxial cable that will handle more power and more efficiently than most coaxial cables but without the bulky, hard to bend and heavy RG-8 etc. The UHF male connectors are molded for a strong and long life connection. Good for:
- Amateur Radio Antennas
- CB Radio Antennas
- R.F. Equipment
- Linear Amplifiers
- SWR Meters
- Power Meters
- Computers using 50 Ohm Cables with UHF Connectors
Price: $11.69
| |
| |
|
 | SMA Male to UHF Female Adaptor Cable
Philmore # CA740
For hand-held Ham or Business Transceivers (HT) with SMA antenna connectors; adapts the antenna connection to a UHF female for connection to mobile or base antennas with a PL-259 termination. This minature 50 Ohm RG174/U coaxial cable is 16 inches long. Using this adaptor cable will help to reduce strain on the radio's SMA antenna jack.
Price: $7.95
|
| |
|
Thumb-Screw - 4 mm Thread Size
Pack of 2 - Philmore # K40
Replacement Screws for CB's, PA's Car Mounts, Scanner's etc. Large thumb-screw mounting screws, typically found with mobile radios. Three sizes are available and they are packaged two per part number (i.e. order one of the part number and you will receive one package of two screws). These are machined brass with a heavy nickel plated finish. Threaded part is 3/8" long. Three different diameters are available.
Price: $2.55
|  |
| |
|
| | Thumb-Screw - 5 mm Thread Size
Pack of 2 - Philmore # K50
Replacement Screws for CB's, PA's Car Mounts, Scanner's etc. Large thumb-screw mounting screws, typically found with mobile radios. Three sizes are available and they are packaged two per part number (i.e. order one of the part number and you will receive one package of two screws). These are machined brass with a heavy nickel plated finish. Threaded part is 3/8" long. Three different diameters are available.
Price: $2.75
|
| |
|
Thumb-Screw - 6 mm Thread Size
Pack of 2 - Philmore # K60
Replacement Screws for CB's, PA's Car Mounts, Scanner's etc. Large thumb-screw mounting screws, typically found with mobile radios. Three sizes are available and they are packaged two per part number (i.e. order one of the part number and you will receive one package of two screws). These are machined brass with a heavy nickel plated finish. Threaded part is 3/8" long. Three different diameters are available.
Price: $2.75
| |
| |
|
 | Microphone Hang-Up Holder
Philmore # H200SS
Designed for rear hanger microhone buttons, this device can be mounted to a radio, dash board are anywhere you want to hang your communication microphone.Made of Stainless Steel.
Price: $2.67
|
| |
|
SWR Bridge Power and Field Strength Meter
Perfect dual-purpose meter for checking SWR measurements, as well as reading the field strength in both mobile and home station rigs. Can monitor outpus in the circuit continuously. Measures power in two ranges, 1/2 to 10 watts and 100 watts. Attractive black metal cabinet and supplied with Field Strength (FS) antenna and set of instructions. Specifications: SWR: 1:1 to 1:3 RF Power: 0.5-10W and 0.5 -100 W Switchable Accuracy: SWR: +-5%, Power +-10% Impedance: 52 ohms Meter Sensitivity: 200uA Frequency Range: 1.7 to 150 Mhz Size: 5-1/4"H X 2-1/4"D X 1-15/16".
Price: $42.95
|  |
| |
|
 | Hand Held Push to Talk
Calrad 10-82
Impedance: 500 Ohm
5 wire cable no plug
For CB & Professional Communications, Tour Bus and Restaurant Paging
Push to talk
Click Here For Technical Information
Price: $18.95
|
| |
|
Hand Held Push to Talk
Speco DM-520
Impedance: 500 Ohm
5 wire cable no plug ( see DM-520P w/1/4" plug)
For CB & Professional Communications, Tour Bus and Restaurant Paging
Push to talk
Price: $12.95
|  |
| |
|
| | Hand Held Push to Talk with 1/4" Plug
Speco DM-520P
Impedance: 500 Ohm
Coiled Cable with 1/4" mono plug
Professional Communications, Tour Bus and Restaurant Paging
Push to talk
Price: $13.49
|
| |
