$20.00 Minimum Merchandise Order - Thank You!

Online Catalog:Philmore and Calrad Electronics :Plugs, Jacks, Adapters and Cables:Coaxial Power Plugs/Jacks and Cables:Coaxial Power Jacks and Jacks with Cords

	0.7 mm ID x 2.35 mm OD Male Jack Philmore 261 Solder lug terminals & flexible plastic strain relief. Mates with: Philmore Plug # 235 & 2359 Philmore Plug with Cord: 48-410   Click Here for Catalog Picture Price:  $2.66
1.3 mm ID x 3.5mm OD Male Jack Philmore 256 Solder lug terminals & flexible plastic strain relief. Mates with: Philmore Plug # 204 & 2049 Philmore Plug with Cord: TC204   Click Here for Catalog Picture Price:  $2.64
	1.7 mm ID x 4.0 mm OD Male Jack Philmore 262 Solder lug terminals & flexible plastic strain relief. Mates with: Philmore Plug # 240 & 2409 Philmore Plug with Cord: TC240   Click Here for Catalog Picture Price:  $2.77
1.7 mm ID x 4.75 mm OD Male Jack Philmore 263 Solder lug terminals & flexible plastic strain relief. Mates with: Philmore Plug # 275 & 2759 Philmore Plug with Cord: TC275   Click Here for Catalog Picture Price:  $2.77
	2.1 mm ID x 5.5 mm OD Philmore 257 Same as Calrad 30-333 Solder lug terminals & flexible plastic strain relief. Mates with: Philmore Plugs: 210, 2109 & 219 (210L works but barrel length is about 3.8mm too long) Philmore Plugs with Cord: TC210, TC218, & 48-218   Click Here for Catalog Picture Price:  $1.84
2.1 mm ID x 5.5 mm OD To Solderless Terminal Philmore 48-1265 This jack is a time saving and inexpensive way for installers to terminate cables with DC power plugs. Only a small Phillips screw driver is required. There is a molded jack on one end, and a solderless terminal at the other end of a 2" flexible cord. The polarity is indicated by a + on the terminal, which is connected to the tip (center) of the DC jack. The solderless terminal has a polarity marking and will accomodate up to 14 AWG wires. Both ends have a flexible strain relief. Mates with: Philmore Plugs: 210, 2109 & 219 (210L works but barrel length is about 3.8mm too long) Philmore Plugs with Cord: TC210, TC218, & 48-218   Price:  $1.96
	2.1 mm ID x 5.5 mm OD with 12" 22AWG Cord Philmore 48-255 The jack is molded to a black 22 gauge 12 inch black zip cord and the other end is stripped and tinned. Mates with: Philmore Plugs 210 & 2109, 210L & 219 Philmore Plugs with Cord: TC210, TC218, & 48-218   Click Here for Catalog Picture Price:  $1.76
2.1 mm ID x 5.5 mm OD with 6ft 22AWG Cord Philmore 48-257 The jack is molded to a black 22 gauge six foot zip cord and the other end is stripped and tinned. Mates with: Philmore Plugs # 210 & 2109, 210L & 219 Philmore Plugs with Cord: TC210, TC218, & 48-218   Click Here for Catalog Picture Price:  $2.59
	2.1 mm ID x 5.5 mm OD with 6ft 18 AWG Cord Philmore 48-287 The jack is molded to a black 18 gauge six foot zip cord and the other end is stripped and tinned. Mates with: Philmore Plugs 210 & 2109, 210L & 219 Philmore Plugs with Cord: TC210, TC218, & 48-218   Price:  $3.27
2.1 mm x 5.5 mm Jack to Jack DC Coaxial Feed-Thru Gold Plated Philmore 45-257 This is a uniquely designed gold plated 2.1x 5.5mm feed-thru isolated DC coaxial jack. It has a male jack at both ends (male because it has a center pin). It is designed for panel mounting but it could be also used as an in-line coupler for 2 female plugs. This item offers a perfect solution for passing power connections though custom cabinetry or dashboards. It also fits the Philmore Designer series wall plates with 7/16 Hex holes. Plating: Gold Mounting hole: 3/8" (0.375") Overall length: 1.72". Maximum panel thickness: 0.150" +   Price:  $2.44
	2.5 mm ID x 5.5mm OD Philmore 258 Same as Calrad 30-334 Solder lug terminals & flexible plastic strain relief. Mates with: Philmore Plugs: 250, 259 & 2509 (250L works but barrel length is about 3.8mm too long) Philmore Plugs with Cord: TC250, TC258, & 48-228   Click Here for Catalog Picture Price:  $1.89
2.5mm ID x 5.5 mm OD To Solderless Terminal Philmore 48-1268 This jack is a time saving and inexpensive way for installers to terminate cables with DC power plugs. Only a small Phillips screw driver is required. There is a molded jack on one end, and a solderless terminal at the other end of a 2" flexible cord. The polarity is indicated by a + on the terminal, which is connected to the tip (center) of the DC jack. The solderless terminal has a polarity marking and will accomodate up to 14 AWG wires. Both ends have a flexible strain relief. Mates with: Philmore Plugs: 250, 259 & 2509 (250L works but barrel length is about 3.8mm too long) Philmore Plugs with Cord: TC250, TC258, & 48-228   Price:  $1.96
	2.5 mm ID x 5.5 mm OD with 6ft 22AWG Cord Philmore 48-258 The jack is molded to a black 22 gauge SIX foot zip cord and the other end is stripped and tinned. Mates with: Philmore Plugs # 250, 259 & 2509 for the best match. 250L works but barrel length is a little too long. LI> Philmore Plug with Cords: TC250, TC258, & 48-228   Click Here for Catalog Picture Price:  $2.42
2.5 mm ID x 5.5 mm OD with 6ft 18 AWG Cord Philmore 48-288 The jack is molded to a black 18 gauge SIX foot zip cord and the other end is stripped and tinned. Accepts 9.3 to 9.5mm barrel length plug for best fit. Mates with: Philmore Plugs 250, 259 & 2509 for best match. 250L works but barrel length is a little too long. Philmore Plug with Cords: TC250, TC258, & 48-228   Price:  $3.27
	2.5 mm ID x 5.5 mm OD with 10ft 18 AWG Cord CA206INL10FT18AWG-ST The jack is molded to a black 18 gauge TEN foot zip cord and the other end is stripped and tinned. Accepts 9.3 to 9.5mm barrel length plug for best fit. Mates with: Philmore Plugs 250, 259 & 2509 for best match. 250L works but barrel length is a little too long. Philmore Plug with Cords: TC250, TC258, & 48-228   Price:  $3.77
2.5 x 5.5 mm Jack to Jack DC Coaxial Feed-Thru Nickel Plated Philmore 45-258 This is a uniquely designed nickel plated 2.5x 5.5mm feed-thru isolated DC coaxial jack. It has a male jack at both ends (male because it has a center pin). It is designed for panel mounting but it could be also used as an in-line coupler for 2 female plugs. This item offers a perfect solution for passing power connections though custom cabinetry or dashboards. It also fits the Philmore Designer series wall plates with 7/16 Hex holes. Plating: Gold Mounting hole: 3/8" (0.375") Overall length: 1.72". Maximum panel thickness: 0.150" +   Price:  $2.44
	3.3 mm ID x 5.5mm OD 1.0 mm Center Pin Hole Philmore 264 Solder lug terminals & flexible plastic strain relief for cables up to 4.0mm O.D. Mating Philmore Plugs: 255, 2559 Mating Philmore Plugs with Cord: 48-420 Complies with EIAJ (Electronic Industries Association of Japan) class 4 or IV RC-5320 Standards. Class Voltage: 10.5 - 13.5V @ 2A   Price:  $3.64
4.3 mm ID x 6.5mm OD 1.4 mm Center Pin Hole Philmore 266 Solder lug terminals & flexible plastic strain relief for cables up to 4.0mm O.D. Mating Philmore Plug: 265 Complies with EIAJ (Electronic Industries Association of Japan) class 5 or V RC-5320 Standards. Class Voltage: 13.5 - 18 V @ 2A   Price:  $3.81
	5.0 mm ID x 7.4mm OD 0.6 mm Center Pin Hole Philmore 274 Commonly used on power supplies for Dell & HP laptop computers. It can be used on 2 or 3 wire power cords. Class Voltage: 18.5 - 19.5 V @ 4A Maximum Barrel Length: 12.4mm   Price:  $5.29

Online Catalog:Philmore and Calrad Electronics :Plugs, Jacks, Adapters and Cables:Coaxial Power Plugs/Jacks and Cables:Coaxial Power Jacks and Jacks with Cords

Minute Man Electronics

$20.00 Minimum Merchandise Order - Thank You!