| | |
 | 0.7mm Center Pin x 2.35mm ID
EIAJ Class 1 Panel Mounted
Philmore 335
This is an isolated jack, meaning the outer barrel of the plug is not electrically connected to the chassis that the jack is mounted to. The jack inserts into the front of the panel, while the lockwasher and locking nut is secured from the back side for a clean look. Mates with:
- Philmore Mating Plugs: 235
- Philmore Plug with Cord: 48-410
EIAJ Class I (3.15 VDC and below) Mounting hole: 0.325"
Click Here for Catalog Picture
Price: $1.96
|
| |
|
1.7mm Center Pin x 4.0mm ID
EIAJ Class 2 Panel Mounted
Philmore 340
This is an isolated jack, meaning the outer barrel of the plug is not electrically connected to the chassis that the jack is mounted to. The jack inserts into the front of the panel, while the lockwasher and locking nut is secured from the back side for a clean look. Mates with:
- Mating Plug: No. 240
- Mating Plug with Cord: TC240
- Mounting hole: 0.325"
- Thread length: 0.145"
- EIAJ Class II (3.16 - 6.3 VDC)
Click Here for Catalog Picture
Price: $1.96
| |
| |
|
| | 1.7mm Center Pin x 4.75mm ID
EIAJ Class 3 Panel Mounted
Philmore 375
This is an isolated jack, meaning the outer barrel of the plug is not electrically connected to the chassis that the jack is mounted to. The jack inserts into the front of the panel, while the lockwasher and locking nut is secured from the back side for a clean look.
- Mating Plug: No. 275
- Mounting hole: 0.325"
- EIAJ Class III (6.4 - 10.5 VDC)
Click Here for Catalog Picture
Price: $1.96
|
| |
|
2.1mm Center Pin x 5.5mm ID
Panel Mounted - Philmore 247
This jack has a normally closed switch that opens when the plug is inserted. There are 3 terminals on the back side; one for the center pin, one for the outer jacket connection and the other is the switched outer jacket connection. The switch can be used to switch from battery to wall transformer power. This is an isolated jack, meaning the outer barrel of the plug is not electrically connected to the chassis that the jack is mounted to. The jack inserts into the back of the panel, while the locking nut is secured from the front side. Mates with:
- Philmore Plug # 210 & 2109, 210L & 219
- Philmore Plug with Cord: TC210, TC218, & 48-218
- Mounting hole: 0.50" (front mount)
- Thread length: 0.450"
Click Here for Catalog Picture
Price: $1.36
|  |
| |
|
 | 2.1mm Center Pin x 5.5mm ID
Snap-In Panel Mounted
Philmore 2477
Same as Calrad 30-720-2.1Mates with:
- Philmore Plug # 210 & 2109, 210L & 219
- Philmore Plug with Cord: TC210, TC218, & 48-218
Mounting hole: 7/16" (0.437")
Click Here for Catalog Picture
Price: $1.72
|
| |
|
2.5mm Center Pin x 5.5mm ID
Panel Mounted - Philmore # 248
This jack has a normally closed switch that opens when the plug is inserted. There are 3 terminals on the back side; one for the center pin, one for the outer jacket connection and the other is the switched outer jacket connection. The switch can be used to switch from battery to wall transformer power. This is an isolated jack, meaning the outer barrel of the plug is not electrically connected to the chassis that the jack is mounted to. The jack inserts into the back of the panel, while the locking nut is secured from the front side. Mates with:
- Philmore Mating Plugs: 250, 250L , 259 , 2509
- Philmore Plug with Cord: TC250, TC258, & 48-228
- Mounting hole: 0.50" (front mount)
- Thread length: 0.450"
Click Here for Catalog Picture
Price: $1.79
| |
| |
|
 | 2.5mm Center Pin x 5.5mm ID
Snap-In Panel Mounted
Philmore 2487
Mates with:
- Philmore Mating Plugs: 250, 250L , 259 , 2509
- Philmore Plug with Cord: TC250, TC258, & 48-228
Mounting hole: 7/16" (0.437")
Click Here for Catalog Picture
Price: $1.72
|
| |
|
3.5mm x 5.5mm ID
EIAJ Class 4 Panel Mounted
Philmore 355
This is an isolated jack, meaning the outer barrel of the plug is not electrically connected to the chassis that the jack is mounted to. This jack inserts into the front of the panel, while the locking nut is secured from the back side for a clean look.
- Mating Plug: No. 255
- Mounting hole: 0.53 inch
- EIAJ Class IV (10.6 - 13.5 VDC)
This jack is a bit different in that it does not have a pin, but has a hole in it to receive the mating plug's pin. The mating plug No. 255 has a 1.0mm center pin.
Click Here for Catalog Picture
Price: $2.56
|  |
| |
|
| | 4.35mm x 6.3mm ID
EIAJ Class 5 Panel Mounted
Philmore 365
This is an isolated jack, meaning the outer barrel of the plug is not electrically connected to the chassis that the jack is mounted to. This jack inserts into the front of the panel, while the locking nut is secured from the back side for a clean look. Mating Plug: No. 265
- Mounting hole: 0.53 inch
- EIAJ Class (13.6 - 18 VDC)
This jack is a bit different in that it does not have a pin, but has a hole in it to receive the mating plug's pin. The mating plug No. 265 has a 1.4mm center pin.
Click Here for Catalog Picture
Price: $2.56
|
| |
