| | |
 | Relay PC Boards (2 Boards)
Philmore # 12-605
Use with any of the relays shown below. Wires maybe soldered to this board or used with terminal blocks TB132 or TB133 which fit these PC boards.You receive 2 of these boards. This same board is used in the loaded board kit 80-043.
Price: $3.49
|
| |
|
PC Board Mounted Relay
Philmore DATAKit # 80-043
There are many applications where you need quick availability of a relay for connection to a particular piece of apparatus. You also want a quick way to connect wires, a diode across the relay to discharge the back emf generated by the relay and have it all on a single mountable board. THIS SIMPLE KIT SOLVES THE PROBLEM! It comes with a 12 volt relay but you can also order any of the other relays shown below and replace the 12 volt relay with a 3, 6, 9 or 24 volt relay. All relays have a 10 Amp contact. Idea for the output of many circuits that have an alarm signal which must be connected to a remote switching device. Ideal for testing kits that needs a relay connected to it. We suggest you also order a soldering tool kit to make this project. Click here to go to this item (# S540). Click Here For Picture Of Soldering Kit # S540.
Price: $11.64
|  |
| |
|
 | 3VDC SPDT 10A PCB Mounted Relay
Philmore 86-103
This series of PC board mounting relays has a high contact capacity (10 Amps) in a very small package. They are completely sealed and protected from dust, and solder flux. These relays can be used for flow soldering.
- Coil Voltage: 3 VDC
- Coil Current: 120 mA
- Coil Resistance: 25 Ohms
- Pull-in Voltage: 75% max
- Contact Capacity: 10A @ 24VDC
- Resistive Load 10A @110 VAC
- UL Recognized, CSA Certified
Click Here For Drawing
Click Here for Catalog Page (.pdf)
Price: $3.89
|
| |
|
5VDC SPDT 10A PCB Mounted Relay
Philmore 86-105
This series of PC board mounting relays has a high contact capacity (10 Amps) in a very small package. They are completely sealed and protected from dust, and solder flux. These relays can be used for flow soldering.
- Coil Voltage: 5 VDC
- Coil Current: 73 mA
- Coil Resistance: 70 Ohms
- Pull-in Voltage: 75% max
- Contact Capacity: 10A @ 24VDC
- Resistive Load 10A @110 VAC
- UL Recognized, CSA Certified
Click Here For Drawing
Click Here For Catalog Page (.pdf)
Price: $3.89
| |
| |
|
| | 6VDC SPDT 10A PCB Mounted Relay
Philmore 86-106
This series of PC board mounting relays has a high contact capacity (10 Amps) in a very small package. They are completely sealed and protected from dust, and solder flux. These relays can be used for flow soldering.
- Coil Voltage: 6 VDC
- Coil Current: 60 mA
- Coil Resistance: 100 Ohms
- Pull-in Voltage: 75% max
- Contact Capacity: 10A @ 24VDC
- Resistive Load 10A @110 VAC
- UL Recognized, CSA Certified
Click Here For Drawing
Click Here for Catalog Page
Price: $3.89
|
| |
|
9VDC SPDT 10A PCB Mounted Relay
Philmore 86-109
This series of PC board mounting relays has a high contact capacity (10 Amps) in a very small package. They are completely sealed and protected from dust, and solder flux. These relays can be used for flow soldering.
- Coil Voltage: 9 VDC
- Coil Current: 40 mA
- Coil Resistance: 225 Ohms
- Pull-in Voltage: 75% max
- Contact Capacity: 10A @ 24VDC
- Resistive Load 10A @110 VAC
- UL Recognized, CSA Certified
Click Here For Drawing
Click Here for Catalog Page
Price: $3.89
| |
| |
|
| | 12VDC SPDT 10A PCB Mounted Relay
Philmore 86-112
This series of PC board mounting relays has a high contact capacity (10 Amps) in a very small package. They are completely sealed and protected from dust, and solder flux. These relays can be used for flow soldering.
- Coil Voltage: 12 VDC
- Coil Current: 30 mA
- Coil Resistance: 400 Ohms
- Pull-in Voltage: 75% max
- Contact Capacity: 10A @ 24VDC
- Resistive Load 10A @110 VAC
- UL Recognized, CSA Certified
Click Here For Drawing
Click Here for Catalog Page
Price: $3.89
|
| |
|
18VDC SPDT 10A PCB Mounted Relay
Philmore 86-118
This series of PC board mounting relays has a high contact capacity (10 Amps) in a very small package. They are completely sealed and protected from dust, and solder flux. These relays can be used for flow soldering.
- Coil Voltage: 18 VDC
- Coil Current: 20 mA
- Coil Resistance: 900 Ohms
- Pull-in Voltage: 75% max
- Contact Capacity: 10A @ 24VDC
- Resistive Load 10A @110 VAC
- UL Recognized, CSA Certified
Click Here For Drawing
Click Here for Catalog Page
Price: $3.89
| |
| |
|
| | 24VDC SPDT 10A PCB Mounted Relay
Philmore 86-124
This series of PC board mounting relays has a high contact capacity (10 Amps) in a very small package. They are completely sealed and protected from dust, and solder flux. These relays can be used for flow soldering.
- Coil Voltage: 24 VDC
- Coil Current: 15 mA
- Coil Resistance: 1600 Ohms
- Pull-in Voltage: 75% max
- Contact Capacity: 10A @ 24VDC
- Resistive Load 10A @110 VAC
- UL Recognized, CSA Certified
Click Here For Drawing
Click Here for Catalog Page
Price: $3.89
|
| |
