| | |
 | PadBoard-3U
1 Oz Copper .1" Centers
BPS part PAD3U
General purpose pad-per-hole PCB with plated holes. Double sided board allows soldering to either side of the board.A square pad every 5th hole makes it easy to align compoents. Lead free etched copper PCB with a flux coating and soldermask for easy soldering. Accepts a 96 pin DIN-41612 VME connector.
- Holes: 38 x 62 holes, .1" centers (2.54mm)
- Standard: 3U Eurocard size/VME
- Board: Double Sided Etched FR-4 glass-epoxy
- Size: 100 x 160 mm (3.9" x 6.3"), 1/6" thick
Click Here for More Details
Price: $12.59
|
| |
|
Versa Strip Phenolic Prototype Board
GC Waldom 22-500
IC’s plug directly into board with 0.1" spacing. Accepts 14 to 20 pin IC’s. Silver plated lands with 24-way card edge connector plug on one end. Made of tough phenolic.-
Size: 2-3/8" wide x 4" long x 1/16" thick
- Material: Phenolic
- Pre-Drilled to .035"
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $4.19
|  |
| |
|
 | Small General Purpose
Phenolic Protoboard
Philmore Datak 12-602
This is two identical phenolic boards and scored for easy break-apart when only a very small board is needed. This is a simple board with a matrix of (single) holes on 1/10" centers, copper one side. -
Size: 1.8" Wide by 3.6" Long or 2 boards @ 1.8" x 1.8"
- Material: Phenolic
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $2.29
|
| |
|
Small General Purpose
Fiberglass Protoboard
Philmore Datak 12-603
Same as 12-602 but FR-4 Fiberglass. (Pictures shows 12-602)This is two identical fiberglass boards and scored for easy break-apart when only a very small board is needed. This is a simple board with a matrix of (single) holes on 1/10" centers, copper one side. Fiberglass is stronger than phenolic boards and does not absorb moisture. -
Size: 1.8" Wide by 3.6" Long or 2 boards @ 1.8" x 1.8"
- Material: 1/16" FR-4 Fiberglass
- Dielectric Constant: 4.7 MHz and 4.25 at 1 GHz
- Pre-Drilled
- Hole Spacing: 0.1"
- Etched on one side
.
Price: $3.64
| |
| |
|
 | SMTboard-3U
1/16", 1 Oz Copper
BPS # SMT3U
Prototyping circuit board with ground plane for SOIC, SOT23, 1206, 0805, and other SMT components.SMTboard-3U has rectangular pads ideal for 0805 and 1206 surface mount components along with three SOIC and SOT23 prototype areas. Unplated holes in every second pad allows for easy connection to the solid ground plane on the back. There is a through-hole prototyping area at one end, and two power rails. The BusBoard zig-zag circuit pattern on the through hole area allows easy access to both sides of headers and ICs. The glass epoxy board is a standard single height (3U) VME/Eurocard size (3.9 x 6.4", 100 x 160mm).
- Grid: SMT pads have .1" centers
- Hole Size: .031"
- Standard: 3U Eurocard size
- Board: Single Sided Etched FR-4 glass-epoxy
- Size: 100 x 160 mm (3.9" x 6.3"), 0.8mm (1/16") thick thick
Click here for product details (.pdf)
Price: $12.59
|
| |
|
SMTboard-3U-THIN
1/32" 1 Oz Copper
BPS # RF3U
A thinner version fo the SMTboard for easier cutting and lower inductance to the ground plane for RF circuits.SMTboard-3U has rectangular pads ideal for 0805 and 1206 surface mount components along with three SOIC and SOT23 prototype areas. Unplated holes in every second pad allows for easy connection to the solid ground plane on the back. There is a through-hole prototyping area at one end, and two power rails. The BusBoard zig-zag circuit pattern on the through hole area allows easy access to both sides of headers and ICs. The glass epoxy board is a standard single height (3U) VME/Eurocard size (3.9 x 6.4", 100 x 160mm).
- Grid: SMT pads have .1" centers
- Hole Size: .031"
- Standard: 3U Eurocard size
- Board: Single Sided Etched FR-4 glass-epoxy
- Size: 100 x 160 mm (3.9" x 6.3"), 0.8mm (1/32") thick thick
Click here for product details (.pdf)
Price: $12.59
| |
| |
|
 | SMDpads-3U-Thin
1 Oz Copper .1" Centers
BPS # SP3UT
A grid of square pads for 0402, 0603, 0805, 1206, and other SMT parts with a ground plane. A grid of 42mil square pads on 50 mill centers allows SMT components of various sizes and pitches to be mounted. Larger components can span pads. SOIC (50 Mil pitch) and DIP (100 mill pitch) integrated circuits can be soldered directly to the pads without adapters. Solid ground plane provides easy ground connections and low noise in circuits. Every fourth SMT square pad has an unplated hole for easy connection to the ground plane. Just insert a wire and solder both sides. Lead free etched copper PCB with a flux coating and soldermask for easy soldering. Bridge pads or solder wires on pads to create traces wherever they are needed.
- Grid: 42 mill square pads on 50 mill centers
- Hole Size: .031"
- Standard: 3U Eurocard size
- Board: Single Sided Etched FR-4 glass-epoxy
- Size: 100 x 160 mm (3.9" x 6.3"), 1/32" thick
Click Here for More Details
Price: $12.59
|
| |
