| | |
 | Slik-Clip Miniature Test Lead Clip
The Slik-Clip is intended for the serious user. This well designed made in Japan new clip is entirely insulated and guards aginst accidental contact with adjacent wires or component leads that are far better than other insulated clips. Precision jaws will grip the finest component leads or hook-up wire,a sure connection without slipping intermittent contacts. Fully assembled, clip lenth is only 1.4" which is comparable to other minature "alligator clips". Install on stranded wire (24 to 20 gauge) by crimping with either the Philmore WS26 crimping tool or similar. This is a kit of black, green, red, white, yellow and blue clips, and includes assembly instructions. Also available individually in bulk.
Price: $10.95
|
| |
|
Deluxe Universal Solderless Test Leads
Philmore SA15
Two 42" flexible, vinyl-covered test leads, heavily insulated to prevent high voltage breakdown and cut-through. 80-strand copper conductors eliminate wire fatigue and assure long life. Equipped with adaptor accessories most often used by servicemen, this kit can perform virtually every test requirement. Each lead is attached to a 4-3/4" probe (1-red, 1-black). Banana plugs on each end have nickel-plated phosphor bronze springs to maintain rigid contact through many thousands of insertions. Heavy plated BRASS Adaptors-Color-coded Spade Lugs that are large enough for lab. instruments (up to 1/4" dia. center post). Test prod phone tips(0.180" dia.) Strong spring action alligator clips. NP phone tips.-not insulated. Each insulated adaptor completely covers banana plugs to eliminate accidental contact, avoiding shorts.
Price: $8.62
|  |
| |
|
 | All-Purpose Test Lead Set
Philmore 470
The most useful test leads yet devised. Use them in the conventional manner or adapt them to individual requirements.
- Tiny, sturdy, push-to-clip prods can be firmly attached to hard-to-reach components in chassis-whether large or small terminals. Clip-onto-component feature enables you to test parts for long periods without actually handling the test leads. Hands are free for other work.
- Each prod is connected with solderless, kinkless wire terminating in an insulated banana plug
- A removable, nickel-plated phone tip (supplied) fits over the banana plug allowing the individual the option of using meters with either banana or phone tip jacks.
- Overall leads length is 36 inches.
- Two unbreakable high dielectric strength prods, black and red
Price: $10.57
|
| |
|
All-Purpose Test Lead Set
With Banana Plugs
Philmore 467
Plastic test prod handles, 4" long, 3/8" diameter, with prods 1" long. Red and Black. Equipped with 48" kinkless plastic-covered leads .135" O.D. With insulated banana plugs, (also available with phone tips plugs (see 466), to fit standard American jacks.
Price: $8.81
|  |
| |
|
 | All-Purpose Test Lead Set with Phone Tips
Philmore 466
Plastic test prod handles, 4" long, 3/8" diameter, with prods 1" long. Red and Black. Equipped with 48" kinkless plastic-covered leads .135" O.D. With insulated phone tip plugs, (also available with banana plugs (see 467), to fit standard American jacks.
Price: $8.81
|
| |
|
Shrouded 4mm Test Lead Kit
Philmore 28-5527
This pair of test leads is made for use with multimeters, and other test equipment requiring 4mm safety (shouded) banana plugs. The probe ends come with needle tips. Slide on the included adaptors and your probes are converted to crocodile clips. Specifications
- Material: Nickel-Plated Brass
- Handles: PVC
- Rating: 1000V, 10A
- Length: 39.6"
- 1 Red & 1 Black Probe
- 1 Red & 1 White Crocodile Adaptor clips
Price: $13.99
|  |
| |
|
 | Solderless Red Test Prod
Waldom Model 12-1645-BU
This is a 6" Red Test Prod or Probe. Fits all standard phone tip jacks. Designed for solderless wire connections. -
Material: Nickel plated plug
- Cable opening: 3/16"
- Overall Length: 6 1/4"
- Available in black and red
Price: $2.79
|
| |
|
Solderless Black Test Prod
Waldom Model 12-1646-BU
This is a 6" Black Test Prod or Probe. Fits all standard phone tip jacks. Designed for solderless wire connections. -
Material: Nickel plated plug
- Cable opening: 3/16"
- Overall Length: 6 1/4"
- Available in black and red
Price: $2.79
| |
| |
|
| | Solderless 4" Black Test Prod
Philmore 912J
Picture show red, but this item is black.Made of non-breakable extruded plastic, and available in red and black. Equipped with brass nickel plated solderless phone tips 3/4"long.
Price: $1.23
|
| |
|
Solderless 4 " Red Test Prod
Philmore 913J
Made of non-breakable extruded plastic, and available in red and black. Equipped with brass nickel plated solderless phone tips 3/4"long.
Price: $1.23
| |
| |
|
| | Solder Type 4 -3/4" Red Test Prod
Waldom Model 12-1643
This is a 4-3/4" long red test prod/probe. Fits all standard phone tip jacks. Designed for solder type wire connections. -
Material: Nickel-plated brass tip
- Cable opening: 3/16"
- Overall Length: 3 - 3/4"
- Available in black and red
Price: $2.79
|
| |
|
Solder Type 4 -3/4" Black Test Prod
Waldom Model 12-1644
This is a 4-3/4" long black test prod/probe. Fits all standard phone tip jacks. Designed for solder type wire connections. -
Material: Nickel-plated brass tip
- Cable opening: 3/16"
- Overall Length: 3 - 3/4"
- Available in black and red
Price: $2.79
| |
| |
|
 | Test Prod 5' Leads
Meter Test Leads
Calrad 65-295
Long 1-1/4" sharp tip that is molded to a 5 foot long extra flexible cord. Other end has a 7/8" rounded prod/phone tip. Overall probe length is 5-1/4 inches. Strain relieve on both ends to minimize breakage.
Price: $4.09
|
| |
|
Simpson Test Probe Set
With Aligator Clips
Simpson 00043
This reverse insulated Test Lead Set is for use with the Simpson 260-7, 260-8 Series Standard Meters Dayton 1A578, Simpson 260-8P, and Simpson 260-8PRT. Includes right angle red and black shrouded probe and one pair of red and black screw on alligator clips. For Simpson models
- 260-7,8
- 270-5
- 461, 462, 463, 464-4, 465-3, 467, 470,474,
- 16979, 14510
Price: $18.95
|  |
| |
