| | |
 | ATC, ATG or ATO 6-Output
Fuse Holder with 10 AWG Wire
CES AFB400
This covered fuse block holds 6 individually ATC style fuses. It includes a 24" 10 AWG red input wire with a 3/8" ring terminal. It also is supplied with mounting screws and spade terminals for the 6 output terminals. Provides circuit protection and a clean look for security alarms, stereo and other accessories. Size: 5"L x 2"W x 2-1/8"H
Price: $17.95
|
| |
|
ATC, ATG or ATO Blade Type In-Line Fuse Holder with 8 AWG Wire
Crankin Power AS-ATC8FH
This is a heavy duty fuse holder to used with ATC, ATO, and ATG blade type fuses. It comes with a 12" loop of 8 AWG automotive primary wire that you cut to the length you wish.
Price: $2.85
|  |
| |
|
| | ATC, ATG or ATO Blade Type In-Line Fuse Holder with 10 AWG Wire
Crankin Power AS-ATC10FH
This is a heavy duty fuse holder to used with ATC, ATO, and ATG blade type fuses. It comes with a 12" loop of 10 AWG automotive primary wire that you cut to the length you wish.
Price: $2.69
|
| |
|
ATC, ATG or ATO Blade Type In-Line Fuse Holder with 12 AWG Wire
Crankin Power AS-ATC12FH
This is a heavy duty fuse holder to used with ATC, ATO, and ATG blade type fuses. It comes with a 12" loop of 12 AWG automotive primary wire that you cut to the length you wish.
Price: $2.29
| |
| |
|
| | ATC, ATG or ATO Blade Type In-Line Fuse Holder with 16 AWG Wire
Crankin Power AS-ATC16FH
This is a heavy duty fuse holder to used with ATC, ATO, and ATG blade type fuses. It comes with a 12" loop of 16 AWG automotive primary wire that you cut to the length you wish.
Price: $1.99
|
| |
|
ATC, ATG or ATO Blade Type In-Line Fuse Holder with 18 AWG Wire
Crankin Power AS-ATC18FH
This is a heavy duty fuse holder to used with ATC, ATO, and ATG blade type fuses. It comes with a 12" loop of 18 AWG automotive primary wire that you cut to the length you wish.
Price: $1.95
| |
| |
|
 | Maxi Blade Type In-Line Fuse Holder
With 8 AWG Wire
Philmore FHMAXI
A heavy duty in-line MAXI style fuse holder with a water resistant cap. It is constructed from 8 AWG automotive power cable, and has a screw hole for easy mounting. The fuse holder is rated for up to 80 Amps.
Price: $4.69
|
| |
|
AGC/3AG In-Line Fuse Holder
With 8 AWG Wire
Philmore AS-AGC8FH
This is a Heavy Duty Bakelite fuse holder that holds a AGC or 3AG (1 1/4" x 1/4") fuse. It comes with a 12" loop of 8 gauge automotive primary wire that you cut to the length you wish.
Price: $2.76
|  |
| |
|
| | AGC/3AG In-Line Fuse Holder
With 10 AWG Wire
Philmore AS-AGC10FH
This is a Heavy Duty Bakelite fuse holder that holds a AGC or 3AG (1 1/4" x 1/4") fuse. It comes with a 12" loop of 10 gauge automotive primary wire that you cut to the length you wish.
Price: $1.75
|
| |
|
AGC/3AG In-Line Fuse Holder
With 12 AWG Wire
Philmore AS-AGC12FH
This is a Heavy Duty Bakelite fuse holder that holds a AGC or 3AG (1 1/4" x 1/4") fuse. It comes with a 12" loop of 12 gauge automotive primary wire that you cut to the length you wish.
Price: $1.65
| |
| |
|
| | AGC/3AG In-Line Fuse Holder
With 16 AWG Wire
Philmore AS-AGC16FH
This is a Heavy Duty Bakelite fuse holder that holds a AGC or 3AG (1 1/4" x 1/4") fuse. It comes with a 12" loop of 16 gauge automotive primary wire that you cut to the length you wish.
Price: $1.41
|
| |
|
AGC/3AG In-Line Fuse Holder
With 16 Gauge Red/Black Cord
Includes 10 Amp Fuse
Philmore Model TC3640
This is a two wire 16 gauge red/black zip cord with an in-line fuse holder that holds an AGC or 3AG (1/4 x 1-1/4") fuse. The fuseholder is in the red lead and is supplied with a 10 Amp fuse. The 5 foot cord has stripped and tinned ends. The plastic housing of this fully insulated fuse holder has a spring loaded, twist lock design.
Price: $3.49
|  |
| |
|
 | AGC/3AG Fuse Block
With Plastic Cover - Philmore H108A
Will accommodate the AGC or 3AG (1-1/4" x 1") cartridge type auto fuse. Clips are made of spring brass, and mounting board is made of 1/8" XP laminated Phenolic insulating material. The holder has a center mounting hole that is .094" in diameter. Solder tabs are located on 1/4" round stand off studs on the under side of the fuse holder.
Price: $0.99
|
| |
|
AGC/3AG Double Fuse Block
With Plastic Cover
Philmore H108B
Will accommodate the AGC or 3AG (1-1/4" x 1") cartridge type auto fuse. Clips are made of spring brass, and mounting board is made of 1/8" XP laminated Phenolic insulating material
Price: $1.29
|  |
| |
|
| | AGU/5AG In-Line Fuse Holder
With 8 AWG Wire
Philmore # FH8600
Heavy Duty Spring loaded Fuse holder for AGU or AG Glass fuses. It has machined brass contacts in a bakelite housing with a 12 inch loop of 8 AWG wire.
Price: $2.84
|
| |
|
AGU/5AG Clear Single Fuse Holder
Philmore 64-1009
Same as Crankin Power AS-MAGU4/89/10FH and Right Connection 02-310.This unique fuse holder is made for 4, 8 or 10 AWG power cables. It has 24 Karat Gold Plated contacts and accepts one AGU or 5AG fuse from 20 Amps to 120 Amps
Price: $7.95
|  |
| |
|
 | AGU/5Ag Clear Fuse Holder
With 1' of 4 Gauge Red Power Cable
Plus Ring Terminal
Crankin Power AS-RT4-FH
The CRANKIN' POWER 4 Gauge Heavy Duty AGU Fuse Holder Kit contains all the parts required to hook up your amplifier. One foot of 4 Gauge Transparent Red Power Cable is Pro Quality and made for high power systems. The clear housing on the Fuse Holder is waterproof. A 60 Amp Gold Plated AGU fuse is included. All metal parts including the 4 Gauge Power 5/16" Ring Terminal made of Solid Brass with 24 Carat Gold Plating. Connect the ring terminal to the battery post and connect the cable from your amplifier up to the fuse holder using a simple straight screw driver to secure the cable to the fuse holder.
Price: $7.99
|
| |
|
ANL High Power Fuse Block
14 Karat by Crankin' Power ™
64-1006
This is a 24 Karat Gold Plated, Solid Brass ANL Crankin' Power Fuse Block that comes complete with a sturdy platic base, crystal clear plastic cover, and two hold-down nuts. Holds one High Power ANL Fuse (Fuse not included).
- Fuse Type: ANL
- Power In: 1/0, 2 & 4 gauge wire
- Power Out: 1/0, 2 & 4 gauge wire
Price: $20.94
|  |
| |
|
 | ANL High 14 Karat Power Crankin Power Fuse Block
Crankin' Power # FB1ANL
This is a 24 Karat Gold Plated, Solid Brass ANL Crankin' Power Fuse Block that comes complete with a sturdy platic base, crystal clear plastic cover, and two hold-down nuts. Holds one High Power ANL Fuse (Fuse not included).
- Fuse Type: ANL
- Power In: 1/0 gauge or 2 gauge wire
- Power Out: 1/0 gague or 2 gauge wire
- Maximum Current: 300 Amps
Price: $29.95
|
| |
|
ANL High Power Mega Force™ Fuse Block ANL Fuse Block
Crankin' Power # MFB1ANL
- Fuse Type: ANL
- Power In: 1/0 gauge or 2 gauge wire
- Power Out: 1/0 gague or 2 gauge wire
- Maximum Current: 300 Amps
Price: $19.95
|  |
| |
